Toilet Cubicle Legs is a height-adjustable support leg designed specifically for toilet partition systems. It is used to support and stabilize glass or panel partition walls, keeping the entire partition structure balanced and safe. The base diameter is 65 mm, and the column height can be adjusted from 110 to 150 mm, which can be flexibly adapted to different installation conditions according to the height of the ground. Its circular chassis structure enhances the load-bearing area, and the load-bearing capacity of a single support leg can reach 120 kg, ensuring that the partition board is stable and does not shake. The installation structure adopts a threaded locking design, which is precise to adjust and not easy to loosen, so that the partition system remains stable, beautiful and safe during long-term use. It is widely used in public toilets such as shopping malls, office buildings, and subway stations.

1、Threaded Adjust

The threaded height adjustment structure allows installers to set the support height more accurately after the panel is positioned. Once tightened, it helps reduce unwanted movement compared with loose sleeve-style supports. For buyers, this detail matters because unstable height adjustment can cause uneven panel gaps, loose floor contact and repeated maintenance after the restroom starts operating.

2、Flat Base

The 65 mm circular base gives the leg a wider floor contact area, helping the support stand more securely on tiled surfaces. A small base may press into joints, shift under load or leave the panel feeling unstable. This wider base design helps improve floor contact, supports better weight distribution and makes the cubicle structure easier to keep aligned during installation.

3、Satin Steel

SUS304 and SUS316 stainless steel options are available with a satin surface finish. SUS304 is suitable for most indoor commercial restrooms, while SUS316 is better for coastal areas, humid buildings or restrooms with stronger cleaning routines. The satin finish also makes fingerprints and small handling marks less obvious, helping installed hardware look cleaner after daily use.

1 、Shopping Malls

Shopping mall restrooms need partition hardware that can handle frequent public use and daily cleaning. These Toilet Cubicle Legs help support partition panels and correct small floor height differences during installation. With 120 kg single-leg load capacity and stainless steel material options, they help facility teams reduce panel shaking, loose supports and repeated maintenance calls in busy public washrooms.

2 、Office Buildings

Office building washrooms need stable partition systems that stay neat after long-term staff and visitor use. The 110–150 mm adjustable height range helps installers level cubicles more accurately during fit-out work. The satin stainless steel finish also matches common restroom hardware, helping building managers keep the bathroom area professional and easier to maintain.

3 、Transport Stations

Metro stations, bus terminals and other transport restrooms face heavy traffic and strict maintenance needs. The 65 mm base diameter helps improve floor contact, while the threaded adjustment keeps the support height fixed after installation. For transport facility buyers, this reduces downtime caused by shaky partitions, damaged supports or repeated adjustment work.

4 、School Washrooms

School washrooms need cubicle supports that are strong, simple and easy to inspect. Students may push doors, lean on panels or use the restroom many times each day, so weak legs can become loose quickly. These stainless steel support legs help keep panels aligned, and the adjustable height range gives contractors more flexibility across different campus floor conditions.

5 、Airport Facilities

Airport washrooms require partition hardware that can withstand continuous use, luggage movement and frequent cleaning. SUS316 can be selected when stronger corrosion resistance is needed for demanding maintenance environments. With 120 kg load support and a stable round base, these legs help keep cubicle panels firm and reduce repair interruptions in high-traffic restroom areas.

Production Focus

Our factory supplies Toilet Cubicle Legs for restroom partition contractors, commercial bathroom hardware distributors, transport facility projects and OEM/ODM buyers. For WPF07 orders, production is planned around real installation needs, not only appearance. The team checks stainless steel grade, column height, threaded adjustment structure, base size and satin finish before mass production, helping buyers reduce problems caused by wrong height, unstable floor contact or inconsistent surface quality.

Inspection Points

Quality inspection focuses on the parts that affect cubicle stability after installation. The 110–150 mm adjustment range is checked for smooth movement, the 65 mm base is checked for size accuracy and flatness, and the threaded locking structure is checked for firmness after adjustment. Our team also reviews surface scratches, sharp edges, screw accessory completeness and packing protection before shipment. These checks help reduce loose supports, missing parts and delayed restroom handover.

Project Supply

For bulk restroom projects, approved samples, material grade, surface finish, mounting accessory details and packing requirements can be recorded for repeat orders. This helps buyers keep later batches closer to the first confirmed standard. Monthly supply planning depends on order quantity, SUS304 or SUS316 material choice, packing method and current project schedule. For contractors and distributors, stable records make reordering Toilet Cubicle Legs easier and reduce repeated confirmation work before delivery.