Search DALILAI Products

The best glass hardware is not necessarily the heaviest or most expensive option. It is the hardware that matches the glass dimensions, door movement, installation environment and architectural design.

Glass hardware durability depends on material selection, structural design, machining accuracy, surface treatment and correct installation.

A pivot vs. sliding hinges comparison is more accurately described as pivot hinges versus sliding door hardware.

Fully concealed 3D-adjustable hinges are generally the best choice for flush timber or metal doors because they disappear when the door closes and allow precise gap adjustment.

The three main types of concealed hinges are fully concealed or invisible hinges, concealed cabinet hinges and concealed pivot hinges.

The main types of hinges for glass doors include pivot hinges, wall-to-glass hinges, glass-to-glass hinges, patch fittings and hinges developed for framed or frameless shower doors.

The main difference in a pivot hinge vs. side-mount wall hinge comparison is where the door load is transferred.

Toilet partition fittings are installed by setting out the panel positions, anchoring the support legs and wall brackets, leveling the partitions, hanging the doors, and fitting the hinges, indicator locks, hooks, and top supports.

A mortice door knob is a knob set designed to operate a latch or lock body installed inside a rectangular pocket in the door edge. The knobs connect through a square spindle, allowing either side to rotate the internal follower and retract the latch.

A door handle spring can be fixed by tightening the handle assembly, replacing a removable spring cassette, or installing a new handle when the spring is built into the mechanism.

A window handle can often be fixed by tightening its screws, correcting a loose spindle connection, cleaning minor contamination, or replacing a worn handle.

Replacing a window handle normally requires removing the fixing screws, withdrawing the old spindle, matching the replacement handle to the existing screw spacing and spindle length, and testing the locking mechanism before fully tightening it.