Search DALILAI Products

Removing old door hardware starts with identifying what type of hardware is installed. A lever handle, door knob, pull handle, sliding door handle, glass door lock, hinge, latch, stopper, or cabinet handle may all use different fixing methods.

Polishing brass hardware can restore shine, remove tarnish, and improve the appearance of handles, knobs, plates, and decorative fittings.

Brass hardware can look warm, classic, and premium, but it can also collect fingerprints, dust, oil, water spots, and dark tarnish over time.

There is no single price for stainless steel per pound. The value depends on whether the buyer is asking about scrap, raw sheet, tube, bar, finished hardware, or a fabricated product.

Polishing stainless steel can restore brightness, reduce light surface marks, or create a more reflective finish. The method must match the original surface because satin, brushed, mirror-polished, coated, and plated hardware require different treatment.

Magnets can stick to some stainless steels but not strongly to others. The result depends on the steel’s internal structure, grade, manufacturing process, and amount of cold working.

Standard stainless steel bowls, trays, lunchboxes, utensils, and hardware should not be placed in a microwave unless the product is specifically marked as microwave-safe and the microwave manufacturer permits its use.

Stainless steel does not usually tarnish in the same way as silver, copper, or brass. Its chromium content forms a thin passive oxide layer that helps protect the surface from oxidation and corrosion.

A dummy set is non-turning door hardware used as a fixed pull or decorative handle. It does not operate a latch and does not lock the door.

Door hardware can be painted, but the result depends on the component, surface preparation, coating system, and frequency of use.

Old brass hardware can develop fingerprints, dirt, wax, dark tarnish, and natural patina. Before cleaning it, determine whether the surface is solid brass, brass plated, lacquered, PVD coated, or intentionally aged.

Stainless steel can be welded to carbon steel, but the joint requires more planning than welding two matching pieces of metal.