Search DALILAI Products

Removing a sliding glass door normally involves releasing the anti-lift devices, removing the operating panel from its track, and then dismantling the fixed panel or frame when necessary.

Adjusting a glass shower door pivot hinge should be done carefully because glass doors are heavy, fragile, and sensitive to uneven pressure.

The correct screw size for door hinges depends on the door type, hinge size, door weight, frame material, and installation position.

Installing door hinges on a cabinet requires accurate measuring, clean drilling, correct hinge placement, and careful adjustment after the door is mounted.

Taking a door off its hinges is usually done for painting, replacing hardware, trimming the bottom, moving furniture, repairing the frame, or changing the door.

Shimming a door hinge means placing a thin piece of material behind the hinge leaf to slightly adjust the door position. It is a common solution when a door rubs against the frame, does not close smoothly, has uneven gaps, or sits too low on one side.

Door hardware can be painted, but the result depends on the material, surface finish, preparation method, paint system, and how often the hardware is touched or moved. Some decorative plates may hold paint reasonably well. Lever handles, knobs, hinges, latches, and sliding contact parts are more difficult because they face friction and repeated hand contact.

A dummy set in door hardware is a fixed handle, knob, or lever that does not operate a latch and does not lock the door. It is mainly used for pulling, pushing, or matching the appearance of active door hardware.

Removing old door hardware starts with identifying what type of hardware is installed. A lever handle, door knob, pull handle, sliding door handle, glass door lock, hinge, latch, stopper, or cabinet handle may all use different fixing methods.

Polishing brass hardware can restore shine, remove tarnish, and improve the appearance of handles, knobs, plates, and decorative fittings.

Brass hardware can look warm, classic, and premium, but it can also collect fingerprints, dust, oil, water spots, and dark tarnish over time.

There is no single price for stainless steel per pound. The value depends on whether the buyer is asking about scrap, raw sheet, tube, bar, finished hardware, or a fabricated product.